Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heat exchanger | Heating | Current | Power | Maximum air flow | Frequency | RPM | Speed | Heat recovery efficiency | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Insulation class | Number of electrical heating elements | Transported air temperature | Electric heater current | Current | Connected air duct diameter | Air flow in ventilation mode | Connected air duct size | Filter | Transported air temperature | Outdoor sound pressure attenuation in accordance with DIN EN 20140 | Number of water coil rows | Humidity recovery efficiency | Insulation | Heat recovery efficiency | Total unit power | Sound pressure level at a distance of 1 m | Voltage | Max. unit power without an electric heater | Reheater power consumption | Maximum air flow | SFP | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Air flow in ventilation mode | Air flow in heat recovery mode | Motor IP rating | Max. power without electric heater | Max. unit power | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 1 m in accordance with ISO 3741:2004 | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Heat recovery efficiency in accordance with DIBt LÜ-A 20 | Air flow in heat recovery mode | Remote control panel | Functions | Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 | Classification of air flow sensitivity to pressure difference variations in accordance with EN 13141-8 | * | Motor max. power | ** | *** | Transported air temperature | Perm. amb. temp. | Max. air flow at air flow direction (direct air flow) | Max. air flow at air flow direction (perpendicular air flow) | Max. water temperature | Water coil connection diameter |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tower-V 400 4Е | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 2.00 | - | 3950 | 50 | 1440 | - | - | - | Exhaust | 33 | 457 | -30…+60 | - | IPX4 | 1 | 55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1097 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-M EC 150 | 230 | Inline | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | - | 0.89 | - | 700 | 50/60 | 3060 | - | - | - | Exhaust, Supply | - | 107 | - | B | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 194 | - | 4.70 | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - |
BlauAIR RH 1500 | 200-240 | floor mounting, outdoor mounting | - | - | for rectangular air ducts | - | - | aluzinc | yes | yes | yes | - | - | - | - | 1500 | 50/60 | 3000 | - | - | - | Supply and exhaust | - | 2x610 | - | - | IP34 | 1 | 37 | - | - | - | - | - | - | - | - | - | B | - | - | - | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | - | - | - | 248 | - | - | ePM1 ≥ 50% (ISO 16890) | F7 (EN 779) | - | - | IP54 | - | - | - | 5.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -35...+50 | - | - | - | - |
VENTO A50 (1 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | - | 0.021 | - | 26 | 50 | 599 | - | - | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | - | 24 | 14 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO A50 (2 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | - | 0.026 | - | 53 | 50 | 1155 | - | - | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | - | - | 34 | 24 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-F 50x25 4E | 230 | Inline | centrifugal | - | for rectangular air ducts | 500 | 250 | galvanized steel | no | no | no | - | - | 2.49 | - | 1750 | 50 | 1250 | - | - | - | Exhaust, Supply | - | 535 | -20...+40 | - | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 486 | - | 24.0 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-FI 50x30 6E | 230 | Inline | centrifugal | - | for rectangular air ducts | 500 | 300 | galvanized steel | no | no | yes | - | - | 1.59 | - | 1550 | 50 | 890 | - | - | - | Exhaust, Supply | - | 283 | - | - | IPX4 | 1 | 39 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20...+70 | - | - | - | - | - | - | - | - | - | - | 431 | - | 52.5 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX E 400-6 Pro | 400 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | - | - | 425 | 50 | 2705 | - | - | - | Supply | - | - | - | A | - | 3 | 29 | - | - | - | - | 6000 | - | - | - | - | - | 3 | -25...+40 | 8.7 | - | 150 | - | - | G4 | - | - | - | - | 25 mm mineral wool | - | - | - | - | - | - | 118 | - | 50 | 2016, 2018 | - | - | - | - | - | - | 98 | - | 0.43 | - | 6098 | 9.13 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 500 4Е 50 Hz |
230 | Inline | axial | 500 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 7060 | 50 | 1300 | - | - | - | Exhaust, Supply | - | 420 | - | - | IPX4 | 1 | 58 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | 1961 | - | 11.0 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 1.95 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 500 4Е 60 Hz |
230 | Inline | axial | 500 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 7130 | 60 | 1630 | - | - | - | Exhaust, Supply | - | 455 | - | - | IPX4 | 1 | 59 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | 1981 | - | 11.0 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 2.05 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Blaubox EC ME 300-1.7 S31 | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | - | - | aluzinc | yes | no | - | - | - | - | - | 365 | 50 | - | - | - | - | Supply | - | - | - | - | - | 1 | 35 | - | - | - | - | 1700 | - | - | - | - | - | - | -30…+40 | - | - | 160 | - | - | - | - | - | - | - | 30 mm mineral wool | - | - | - | - | - | - | - | - | 24 | 2018 | - | - | - | - | - | - | 64 | - | 0.3 | - | 1764 | 7.7 | - | - | - | - | Coarce 90% / G4 (option: ePM1 70% / F7) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC LBE2 1200 S21 | 400 | floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | electric preheating, electric reheating | - | - | 1240 | 50/60 | 3630 | - | - | - | Supply and exhaust | 402 | - | - | A+ | - | 3 | 24 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | -25...+40 | - | - | 400 | - | - | - | - | - | - | - | 40 mm mineral wool | 84...96* | - | 34 | - | 350 | 6300 | 344 | - | - | - | - | G4 | G4 + (option: F7) | - | - | - | - | - | 1.6 | - | - | 18.7 | - | 6300 | - | - | - | - | - | Sensor, LCD | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - | - | - | - |
Tower-H EC 225 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | - | 0.80 | - | 1290 | 50/60 | 2400 | - | - | - | Exhaust | - | 101 | -25...+60 | – | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 358 | - | 8 | 2018 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra EC L2 300-E S2 white | 230 | ceiling mounting, wall mounting, floor mounting | - | 125 | for round air ducts | - | - | - | yes | no | yes | - | - | - | - | 300 | 50/60 | - | - | - | - | Supply and exhaust | - | 165 | - | C | - | 1 | 33 | - | - | cross-flow | enthalpy | - | - | - | - | - | - | - | - | - | 1.3 | - | - | - | - | -25...+40 | - | - | 26...45 | - | 51...73 | - | - | - | - | - | 83 | - | 28 | 2016, 2018 | - | G4 | F8, G4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 450х203-4.0-6D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 9.1 | - | 11150 | 50 | 950 | - | - | - | Exhaust, Supply | 76.5 | 4000 | +60 | - | IP54 | 3 | 76 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3097 | - | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box EC 40x20-1 max | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | - | - | - | - | - | 1190 | 50/60 | 3010 | - | - | - | Exhaust, Supply | 10.0 | 192 | - | – | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | - | - | - | 331 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | 1.43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC SB 550-E S14 | 230 | wall mounting, floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | - | - | - | 692 | 50/60 | - | - | - | - | - | - | 350 | - | A | - | 1 | 38 | - | - | counter-flow | enthalpy | - | - | - | - | - | - | - | - | - | - | 200 | - | - | - | -25...+40 | - | - | - | 40 mm mineral wool | 73...91 | - | - | - | - | - | 192 | - | 82 | 2018 | - | G4 | F7 (option: G4) | - | - | - | - | - | - | - | - | - | 2.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LW 2000-2 S17 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | - | 2250 | 50/60 | 3000 | - | - | - | - | - | - | - | - | - | 1 | 64 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | - | - | 500x300 | - | - | - | -25...+40 | - | - | - | 25 mm mineral wool | 68–93 | - | - | - | - | - | 625 | - | - | 2016, 2018 | - | G4 | G4 | - | - | - | - | - | - | - | 1070 | 5 | - | - | - | - | - | - | - | - | - | - | - | - | 2 items x 448 | - | - | - | - | - | - | - | - |
Iso-V ЕС 450 | 230 | Inline | centrifugal | - | for round air ducts | - | - | - | yes | yes | yes | - | - | 3.3 | - | - | 50/60 | 1440 | - | - | - | Exhaust, Supply | 39.0 | 750 | -25 +60 | - | IPX4 | 1 | 50 | 6800 | 6460 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauAIR CFH 6000 | 380-480 | floor mounting, outdoor mounting | - | - | for rectangular air ducts | - | - | aluzinc | yes | yes | yes | - | - | - | - | 6000 | 50/60 | 1700 | - | - | - | Supply and exhaust | - | 2x2650 | - | - | IP34 | 3 | 32 | - | - | - | - | - | - | - | - | - | B | - | - | - | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | - | - | - | 628 | - | - | ePM1 ≥ 50% (ISO 16890) | F7 (EN 779) | - | - | IP54 | - | - | - | 8.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -35...+50 | - | - | - | - |
KOMFORT L 350 | 230 | ceiling mounting, wall mounting, floor mounting | - | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | - | - | 350 | 50/60 | 1150 | - | 78 | - | Supply and exhaust | - | - | - | E | - | 1 | 24-45 | - | - | cross-flow | polystyrene | - | - | - | - | - | - | - | - | - | 1.2 | 125 | - | - | - | -25...+40 | - | - | - | 25 mm mineral wool | - | 260 | - | - | - | - | 97 | - | 45 | 2016 | - | G4 | G4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix 150 min | 230 | Inline | mixed-flow | - | for round air ducts | - | - | polymer-coated steel | no | no | yes | - | - | 0.20 | - | 410 | 50/60 | 1985 | min | - | - | Exhaust, Supply | 6.1 | 45 | +60 | C | IPX4 | 1 | 26 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 114 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix 150 max | 230 | Inline | mixed-flow | - | for round air ducts | - | - | polymer-coated steel | no | no | yes | - | - | 0.23 | - | 550 | 50/60 | 2640 | max | - | - | Exhaust, Supply | 6.1 | 52 | +60 | C | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 153 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Primo 250 (min) | 230 | Inline | mixed-flow | 250 | for round air ducts | - | - | - | no | no | no | - | - | - | 144 | 1038 | 50 | 2292 | min | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 39 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | 288 | - | - | 2018 | - | - | - | - | - | IP20 | - | - | - | - | - | - | 0.70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Primo 250 (mid) | 230 | Inline | mixed-flow | 250 | for round air ducts | - | - | - | no | no | no | - | - | - | 173 | 1447 | 50 | 2626 | med | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 41 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | 402 | - | - | 2018 | - | - | - | - | - | IP20 | - | - | - | - | - | - | 0.81 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Primo 250 (max) | 230 | Inline | mixed-flow | 250 | for round air ducts | - | - | - | no | no | no | - | - | - | 188 | 1715 | 50 | 2876 | max | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | 476 | - | - | 2018 | - | - | - | - | - | IP20 | - | - | - | - | - | - | 0.84 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX DW 1200-4 Pro | 400 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | no | no | yes | - | - | - | - | 1200 | 50 | 2700 | - | - | - | Supply | - | - | - | - | - | 3 | 51 | - | - | - | - | - | - | - | - | - | - | - | -25...+40 | - | 0.55 | - | - | 400х200 | - | - | - | 4 | - | 50 mm mineral wool | - | 320 | - | - | - | - | 333 | - | 57 | 2016, 2018 | - | - | G4 (Option: F7) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 250 4D 50 Hz |
400 | wall mounting | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 850 | 50 | 1400 | - | - | - | Exhaust, Supply | - | 60 | - | - | IPX4 | 3 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | 236 | - | 3.5 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.17 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 250 4D 60 Hz |
400 | wall mounting | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 885 | 60 | 1750 | - | - | - | Exhaust, Supply | - | 89 | - | - | IPX4 | 3 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | 246 | - | 3.5 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Blaubox EC MW 3000 S31 | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | yes | no | - | - | - | - | - | 2930 | 50 | - | - | - | - | Supply | - | - | - | - | - | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | -30…+40 | - | - | 600 x 300 | - | - | - | - | - | 4 | - | 30 mm mineral wool | - | - | - | - | - | - | - | - | 50 | 2018 | - | - | - | - | - | - | - | 425 | - | 1.8 | - | - | - | - | - | - | Coarce 90% / G4 (option: ePM1 70% / F7) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 150 | 1 1/8 |
Clean Box 200 ES | 1 ~ 110-220 | ceiling mounting, wall mounting, flush mounting | - | 200 | for round air ducts | - | - | polymer-coated steel | - | - | - | - | - | 0.1 | 18 | - | 50/60 | - | - | - | - | Supply | 16.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 310 4D (60 Hz) | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 0.32 | - | 2442 | 60 | 1550 | - | - | - | Exhaust | 19 | 202 | -25…+50 | - | IPX4 | 3 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 678 | - | - | – | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 310 4D (50 Hz) | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 0.29 | - | 2300 | 50 | 1410 | - | - | - | Exhaust | 19 | 155 | -25…+50 | - | IPX4 | 3 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 639 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-M EC 250 L | 230 | Inline | centrifugal | 250 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | - | 0.74 | - | 985 | 50/60 | 2500 | - | - | - | Exhaust, Supply | - | 100 | -25...+60 | B | IPX4 | 1 | 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 274 | - | 5.09 | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-B EC 315 | 230 | Inline | centrifugal | 315 | for round air ducts | - | - | galvanized steel | yes | no | yes | - | - | 1.35 | - | 1260 | 50/60 | 2620 | - | - | - | Exhaust, Supply | - | 164.3 | - | – | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - | - | 350 | - | - | 2018 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO A50-1 Pro (1 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | - | 0.021 | - | 26 | 50 | 599 | - | - | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | - | 24 | 14 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO A50-1 Pro (2 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | - | 0.026 | - | 53 | 50 | 1155 | - | - | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | - | - | 34 | 24 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I EC 40x20-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | yes | - | - | 0.69 | - | - | 50/60 | 2470 | - | - | 810 | Exhaust, Supply | 15.1 | 91 | -25...+50 | B | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 225 | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-FI 50x25 4E | 230 | Inline | centrifugal | - | for rectangular air ducts | 500 | 250 | galvanized steel | no | no | yes | - | - | 2.49 | - | 1750 | 50 | 1250 | - | - | - | Exhaust, Supply | - | 535 | - | - | IPX4 | 1 | 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20...+40 | - | - | - | - | - | - | - | - | - | - | 486 | - | 40.5 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX E 200-1.8 Pro | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | - | - | 190 | 50 | 2830 | - | - | - | Supply | - | - | - | A | - | 1 | 27 | - | - | - | - | 1800 | - | - | - | - | - | 3 | -25...+40 | 7.8 | - | 100 | - | - | G4 | - | - | - | - | 25 mm mineral wool | - | - | - | - | - | - | 53 | - | 50 | 2016, 2018 | - | - | - | - | - | - | 73 | - | 0.32 | - | 1873 | 8.12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 300 2Е 50 Hz |
230 | Inline | axial | 300 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 2230 | 50 | 2300 | - | - | - | Exhaust, Supply | - | 145 | - | - | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | 619 | - | 6.2 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 0.66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 300 2Е 60 Hz |
230 | Inline | axial | 300 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 2280 | 60 | 2410 | - | - | - | Exhaust, Supply | - | 178 | - | - | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | 633 | - | 6.2 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 0.79 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC DBE 500 S21 V.2 | 230 | ceiling mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | electric preheating | - | - | 510 | 50/60 | - | - | - | - | Supply and exhaust | 95 | - | - | A+ | - | 1 | 34 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | -25...+40 | - | - | 250 | - | - | - | - | - | - | - | - | 83…96* | - | 44 | - | 238 | - | 142 | - | - | - | - | - | - | - | - | - | - | - | 1.7 | - | - | 9.3 | - | 1050 | - | - | - | - | - | - | Wi-Fi, Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - | - | - | - |
CIVIC EC LB 500 S14 | 230 | floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | without heating | - | - | 580 | 50/60 | 1280 | - | - | - | Supply and exhaust | 191±3% | - | - | A | - | 1 | 25 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | -25...+40 | - | - | 250 | - | - | - | - | - | - | - | 40 mm mineral wool | 75...94* | - | 35 | - | 230 | - | 161 | - | - | - | - | G4 x 2 | G4 + F8 (option: F8 C + H11) | - | - | - | - | - | 1.7 | - | - | 1.7 | - | - | - | - | - | - | - | Sensor | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - | - | - | - |
Tower-H 400 4Е | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 2.00 | - | 3950 | 50 | 1400 | - | - | - | Exhaust | 35 | 457 | -30…+60 | - | IPX4 | 1 | 55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1097 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Eco Komfort(3 speed) | 100-240 | wall mounting | - | - | 160 | - | - | - | yes | - | - | - | - | 0.060 | - | - | 50/60 | 1900 | - | - | - | - | - | 5.5 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | - | 0.79 | - | - | - | - | - | 14 | 26 | - | - | - | - | - | - | - | - | - | 35 | 26 | G3 (Option: F8 PM2,5 > 99 %*) | up to 95 | 25 | - | - | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - | - | - | - | - |
Vento Eco Komfort(1 speed) | 100-240 | wall mounting | - | - | 160 | - | - | - | yes | - | - | - | - | 0.030 | - | - | 50/60 | 800 | - | - | - | - | - | 2.0 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 | - | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | - | 0.96 | - | - | - | - | - | 4 | 4 | - | - | - | - | - | - | - | - | - | 10 | 4 | G3 (Option: F8 PM2,5 > 99 %*) | up to 95 | 8 | - | - | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - | - | - | - | - |
Vento Eco Komfort(2 speed) | 100-240 | wall mounting | - | - | 160 | - | - | - | yes | - | - | - | - | 0.034 | - | - | 50/60 | 1300 | - | - | - | - | - | 3.5 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 35 | - | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | - | 0.84 | - | - | - | - | - | 10 | 19 | - | - | - | - | - | - | - | - | - | 27 | 19 | G3 (Option: F8 PM2,5 > 99 %*) | up to 95 | 15 | - | - | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - | - | - | - | - |
KOMFORT Ultra EC S2 300-H S14 white | 230 | wall mounting, floor mounting | - | 125 | for round air ducts | - | - | - | yes | no | yes | - | - | - | - | 300 | 50/60 | - | - | - | - | Supply and exhaust | - | 165 | - | A | - | 1 | 33 | - | - | cross-flow | polystyrene | - | - | - | - | - | - | - | - | - | 1.3 | - | - | - | - | -25...+40 | - | - | - | 20 mm mineral wool | 55...79 | - | - | - | - | - | 83 | - | 32 | 2016, 2018 | - | G4 | F8, G4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 355x143-4.0-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 8.7 | - | 8150 | 50 | 1410 | - | - | - | Exhaust, Supply | 51 | 4000 | +60 | - | IP54 | 3 | 79 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2264 | - | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 70x40 4D | 400 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | - | 1.62 | - | 5580 | 50 | 1418 | - | - | - | Exhaust, Supply | 41.0 | 828 | - | - | IPX4 | 3 | 57 | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC SB 350-E S21 | 230 | wall mounting, floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | - | - | - | 450 | 50/60 | - | - | - | - | - | - | 178 | - | A | - | 1 | 28 | - | - | counter-flow | enthalpy | - | - | - | - | - | - | - | - | - | - | 160 | - | - | - | -25...+40 | - | - | - | 40 mm mineral wool | 73...91 | - | - | - | - | - | 125 | - | 64 | 2018 | - | G4 | F7 (option: G4) | - | - | - | - | - | - | - | - | - | 1.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LW 1000-2 S18 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | - | 900 | 50/60 | 2600 | - | - | - | - | - | - | - | A | - | 1 | 58 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | - | - | 250 | - | - | - | -25...+40 | - | - | - | 20 mm mineral wool | 72–95 | - | - | - | - | - | 250 | - | 130 | 2016, 2018 | - | G4 | G4 | - | - | - | - | - | - | - | 440 | 1.9 | - | - | - | - | - | - | - | - | - | - | - | - | 2 items x 135 | - | - | - | - | - | - | - | - |
Iso-V 630 4D max | 400 | Inline | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | aluminium, aluzinc | no | yes | yes | - | - | 7.55 | - | - | 50 | 1300 | - | - | - | Exhaust, Supply | 100 | 4250 | - | - | IPX4 | 3 | 69 | 16870 | 14930 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | – | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -40...+60 | - | 4148 | 4686 | - | - |
TwinBox EC 400 | 220-240 | Inline | mixed-flow | - | for round air ducts | - | - | galvanized steel | yes | no | yes | - | - | 4.65 | - | 4410 | 50/60 | 2370 | - | - | - | Exhaust | 129 | 737 | –25…+55 | - | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | 1225 | - | - | 2016, 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KFK 50х30-3 | - | - | - | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 710 6D | 400 | wall mounting | axial | 710 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 15440 | 50 | 830 | - | - | - | Exhaust, Supply | - | 1150 | - | - | IPX4 | 3 | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | 4289 | - | 31.0 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 2.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-HC EC 250 A | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | aluminium | yes | yes | no | - | - | 1.25 | - | 1500 | 50/60 | 3310 | - | - | - | Exhaust | - | 164 | -25...+60 | – | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 417 | - | 9 | 2018 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC DE350 S18 | 230 | - | - | - | - | - | - | painted steel | - | - | - | - | - | - | - | 430 | 50/60 | 3570 | - | - | - | - | - | - | - | A | - | 1 | 31 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | 5.6 | - | 160 | - | - | - | -25...+40 | - | - | - | 40 mm mineral wool | 72–87 | - | - | - | - | 1400 | 119 | - | 82 | 2016, 2018 | - | G4 | G4 + F7 (Option: H13) | - | - | - | 185 | 1585 | 1.3 | 6.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-AM 315 | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 1.34 | - | 1880 | 50 | 2720 | - | - | - | Exhaust | 12.3 | 296 | -25…+45 | - | IPX4 | - | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 522 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80/80x6 V3(1 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 0.32 | - | - | 50 | 1400 | - | - | 88 | Exhaust, Supply | 3.6 | 20 | 50 | C | IPX4 | - | 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80/80x6 V3(2 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 0.34 | - | - | 50 | 1800 | - | - | 130 | Exhaust, Supply | 3.6 | 26 | 50 | C | IPX4 | - | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80/80x6 V3(3 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 0.4 | - | - | 50 | 2600 | - | - | 162 | Exhaust, Supply | 3.6 | 45 | 50 | C | IPX4 | - | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |